• Manufactured in heavier gauge steel for a stronger load capacity
• One joist hanger with adjustable width can handle multiple applications, simplifying purchasing
• Quick and simple installation
• The hangers have bolt holes for 10mm or 12mm fasteners into the face
• Can be installed on solid timber header, I-Beam or concrete/masonry wall
• Compatible with Strong-Drive^® SD screws

Installation

• Use all specified fasteners
• Verify that the beam/header can take the fasteners specified in the table
• Each SDE piece must also be nailed through the holes underneath the joist
• The hangers have bolt holes for 12mm fasteners into the face
• The timber bolted capacity to be determined according to the relevant standards. Do not exceed the load values given in the table
• The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member
• These hangers cannot be skewed